Invitation | Mwelding Technology Exhibits at IC China 2026, Booth B020 Join Us to Discuss High-Quality, Scalable Delivery of Semiconductor UHP Piping

2026-11-11 Visits:


Mwelding to Exhibit at IC China 2026

Shanghai Mwelding Intelligent Technology Co., Ltd. (Mwelding) will take part in the 23rd International Semiconductor Expo (IC China 2026). Targeting welding requirements for UHP gas piping, chemical delivery lines and internal clean piping of semiconductor fab equipment, we supply Closed chamber Tube-to-Tube Orbital Welding Machine, Open Orbital Tube Welding Machine, Circumferential Seam Automatic Welding Equipment, Tube Sheet / U-Tube Orbital Welding Machine for heat exchangers, Orbital Welding Carriage, Hot Wire TIG Cladding System and custom automatic welding equipment. At the booth, we will focus on UHP main lines & secondary distribution piping, gas cabinet / VMB / VMP, precursor & wet chemical piping, CMP slurry piping, vacuum & cooling water circuits, CDU / Manifold, internal EP tube assemblies for process tools. We provide condition assessment, process case sharing, live equipment demonstration and one-on-one technical consultation. Our solutions help customers improve weld cleanliness and consistency, reduce repeated adjustment and rework, and meet production demands for multi-specification & high-volume prefabrication.


Exhibition Name23rd International Semiconductor Expo (IC China 2026)
DateNov 12 – 14, 2026
VenueChina National Convention Center, Beijing
Mwelding BoothB020

Exhibition Background

IC China 2026 is China’s authoritative full-industry-chain semiconductor event covering equipment, materials, manufacturing and packaging & testing. With accelerated domestic wafer fabrication, the welding quality of UHP piping directly impacts chip yield. SEMI F78 imposes strict requirements on weld cleanliness, oxidation-free performance and traceability.Mwelding provides dedicated automatic welding machine and process solutions for semiconductor precision clean piping, the preferred solution for mass delivery of semiconductor piping welds, supporting high-quality mass prefabrication of semiconductor process piping.

Mwelding to Exhibit at IC China 2026

Pain Points of Semiconductor Clean Piping Welding

The main challenges for semiconductor clean piping welding fall into four categories: confined installation space, cleanliness control, quality consistency and inspection traceability. All of them directly affect chip yield.

•Space & Equipment Compatibility: Piping inside dense semiconductor tools, around VCR connections often has straight access less than 20 mm, sometimes only 6 mm, making conventional torch access impossible. When welding ultra-thin-wall tubing below 0.5 mm, heat input is hard to control precisely, leading to burn-through or thermal deformation easily.


•Cleanliness & Oxidation Control: This is the core requirement. Piping must meet EP / BA grade standards. Weld interior requires zero oxidation, no spatter and no particulate contamination to satisfy Class 100 cleanroom specifications. Improper welding processes create oxide layers and particles which contaminate UHP gas and UPW systems. Oxidation discoloration or coarse grain on inner weld surface causes immediate rejection.

•Quality Consistency & Operator Dependency: Weld quality heavily relies on welder experience, leading to unstable mass yield and difficulty achieving zero-defect targets. Traditional welding creates large heat-affected zones and uncontrolled deformation, making consistent batch production hard.

•Inspection & Traceability: Welds must pass helium leak test and level 1 NDT, and full welding records must be traceable. Tiny leaks are difficult to detect; standard soap-bubble tests cannot capture micro leaks down to micron / nanometer level. Mass spectrometer helium leak detectors with sensitivity ≥1×10⁻¹⁰ mbar·L/s are required.

Mwelding to Exhibit at IC China 2026

How Mwelding Automatic Welding Machines Meet Production Needs

MWH Series U-Tube Welding Machine For Heat Exchanger | Dense U-tube bundles & compact workspaces

Designed for U-tube weld joints in heat exchange equipment, the MWH series features compact torch geometry. Together with dedicated tooling, it is configured for improved torch accessibility within dense tube bundles. When joint fit-up and process requirements are satisfied, autogenous TIG welding can be adopted. Program-controlled operation delivers repeatable weld quality. It solves incomplete penetration, cold laps and high rejection rates caused by refrigerant leakage. One operator can manage two machines, supporting mass prefabrication of heat exchangers for evaporator and condenser high-volume delivery.

MWH U-Tube Welding Machine


Typical applications include heat coils, condensers and evaporators equipped with U-tube bundles.

MWP Series All-position Tube Sheet Orbital Welding Machine  |  Tube-to-tubesheet joints for heat exchangers

Built for tube-to-tubesheet joints in shell-and-tube heat exchangers, condensers and evaporators, the MWP series completes orbital welding via precise torch positioning and circular motion control. Autogenous or wire-feed processes are selectable according to nozzle geometry, material and joint specification. It focuses on positioning accuracy, weld formation and batch consistency. Compatible with stainless steel, carbon steel, titanium alloy and more. 24/7 continuous operation supported. Parameter re-tuning is minimized when switching tube sizes, reliably securing gas tightness of tubesheet joints.

MWP Tube Sheet Welding Machine


Among the lineup, MWP-38 compact autogenous tubesheet welding machine suits small and confined tubesheet joints meeting dimensional limits. Final selection should verify tube diameter, pitch and mechanical interference.

MWF Series Closed chamber Tube-to-Tube Orbital Welding Machine   |   Circumferential butt welding of thin-wall metal tubing

MWF series is designed for circumferential butt welding of metal tubing within weld head and process limits. It applies to refrigeration piping, heat exchanger connecting lines and shop pipe prefabrication. The full model range covers tubing diameters Φ3.17–Φ219 mm (single weld head does not cover all sizes). Wall thickness, clamping length and available running clearance must be checked for selection.

MWF Closed Chamber Orbital Welding Machine

The matching MWA-200 power source auto-generates expert welding parameters based on tube OD and wall thickness, storing up to 990 recipes for repeat production and quick changeover. For stainless steel piping, separate control is required for torch-side argon shielding and internal back purge. Circulating water cooling only serves weld head heat dissipation and cannot replace internal anti-oxidation purging.

MWHF Series Circumferential Seam Automatic Welding Equipment   |   Shell, head and large-diameter circumferential joints

For heat exchanger shells, dished heads and nozzle circumferential joints with suitable rotation and fixturing, MWHF series works with custom tooling, workpiece rotation and programmed welding cycles. Suitable for large circumferential seams in shop batch manufacturing. Butt joints and fillet welds must be validated separately according to welding position, weld size and actual structure; thin tube orbital welding parameters cannot be directly reused.

MWHF Circumferential Seam Welding Equipment

Process Qualification & Technical Support

For semiconductor metal piping fabrication, Mwelding delivers full technical service including equipment selection, process qualification, trial weld samples, custom tooling and operator training according to material, tube OD/WT, joint design and site conditions. We help manufacturers upgrade welding automation and stabilize weld quality in mass production.

Mwelding to Exhibit at IC China 2026

FAQ for Semiconductor Piping Orbital Welding

Q:What semiconductor piping and tool components can Mwelding automatic welding machine fabricate?

A:Mwelding orbital welding systems are widely used for semiconductor fab piping prefabrication and process tool manufacturing. Solutions cover UHP main & secondary distribution lines, gas cabinet / VMB / VMP internal piping, precursor & wet chemical delivery piping, CMP slurry piping, vacuum piping, cooling circuits, CDU / Manifold, tubesheet joints and internal EP tube assemblies.

Q:Can MWF Closed chamber Tube-to-Tube Orbital Welding Machine meet clean welding requirements for UHP EP tubing?

A:MWF closed chamber orbital welding machine is the preferred option for tube-to-tube butt joints of UHP EP tubing. Four-channel high-purity argon shielding and stable program control minimize inner-wall oxidation and particle generation. Verify tube size, wall thickness, inner surface roughness grade, joint form and weld head installation clearance during selection.

Q:How to balance multi-specification, small-batch and mass prefabrication?

A:Use MWF series for precision butt welding of small-bore thin-wall clean tubing, and MWHF circumferential seam welding equipment for medium & large bore fittings, flanges and tees. Combined with modular tooling and recipe library, you achieve fast changeover and parameter reuse, securing weld consistency while cutting setup time.

Meet Us in Beijing|IC China 2026

From UHP ultra-high-purity piping welding to dedicated welding for CDU and manifold heat exchange assemblies, from standard precision welding machine series to custom automated systems, Mwelding keeps advancing precision TIG welding technology for semiconductor clean manufacturing. Nov 12–14, 2026, welcome to visit Booth B020 at China National Convention Center, Beijing, to discuss UHP piping orbital welding technology and field engineering practice.
Mwelding IC China 2026 Booth B020

Contact:


  • Website:www.mwelding.com.cn

  • Email: xuqinya@mwelding.com.cn

  • Tel:+86-21-62507510

  • Mobile: +86 19916539408



About Mwelding

Shanghai Mwelding Intelligent Technology Co., Ltd. is a National High-Tech Enterprise & Shanghai Specialized, Refined, Unique & Innovative Enterprise. With over 10 years of focus on automated precision pipe welding, we hold multiple independent welding patents. ISO 9001, ISO 14001, ISO 45001 and CE certifications are obtained. We develop and manufacture tube-to-tube, tubesheet, circumferential seam and hot wire cladding welding equipment. Featuring stable precision, easy operation and competitive value, Mwelding serves thousands of equipment manufacturers worldwide, supporting custom automation and overseas project delivery. 



Leave Your Message


Leave a message