Exhibition Basics
l Full Exhibition Name: China International Air Conditioning, Heating, Ventilation, Refrigeration and Cold Chain Expo 2026 (RACC)
lDate: Oct-22 ~ Oct-24, 2026
l Venue: New Hall, Hangzhou Grand Exhibition Center
l Booth: Booth C73, Hall 3
l Core Exhibits: MWH Series Heat Exchanger U-tube Welding Machine, MWP Series All-position Tube-to-Tubesheet Automatic Welder, MWF Series Closed Tube-to-Tube Orbital Welder, MWHF Series Automatic Girth Welding Equipment, MWA‑200 / MWA‑400 Integrated Intelligent Welding Power Source, Open-type Orbital Pipe Welder, Rail-mounted Automatic Welding Carriage
l Industry Pain Points: Limited working space for dense tube bundles, massive quantity of tube-to-tubesheet joints, high difficulty in quality control for thin-wall tubing, complex working conditions for large girth seams on vessel shells;
l Keywords: RACC Refrigeration Expo, refrigeration pipe orbital welder, heat exchanger U-tube welder, tube-to-tubesheet automatic welder, closed tube-to-tube welder, Mwelding
Exhibition Overview
China International Air Conditioning, Heating, Ventilation, Refrigeration and Cold Chain Expo 2026 (RACC) concluded successfully from Oct 22 to 24 at the New Hall of Hangzhou Grand Exhibition Center. RACC is a professional flagship event for China’s HVAC, heat pump, cold storage and cold chain equipment sectors. It gathers the full industrial chain of heat exchangers, evaporators, condensers, industrial refrigeration units, HVAC system integrators and cold chain equipment manufacturers, focusing on intelligent manufacturing of refrigeration equipment, high-efficiency heat transfer and green cold chain technologies.
Shanghai Mwelding Intelligent Technology Co., Ltd. (Mwelding) showcased its solutions at Booth C73, Hall 3. Responding to practical production demands of heat exchangers, evaporators, condensers, industrial refrigeration units and prefabricated metal piping, we brought a complete equipment lineup including MWH heat exchanger U-tube welders, MWP all-position tube-to-tubesheet automatic welders, MWF closed tube-to-tube orbital welders and MWHF automatic girth welding systems. For typical applications such as dense U-shaped heat transfer bundles, tube-to-tubesheet connections, thin-wall metal pipe butt joints and vessel shell girth seams, we conducted in-depth exchanges with industry partners on automatic welding equipment selection, process qualification and on-site implementation, based on tube material, diameter & wall thickness, joint configuration and mass production requirements.

Core Exhibits at Booth C73, Hall 3
At this show, we fully presented our automated welding equipment portfolio tailored for HVAC, refrigeration and cold chain industries. The lineup addresses key bottlenecks: restricted space for dense tube bundle welding, consistent quality of mass tube-to-tubesheet joints, burn-through and oxidation defects on thin-wall tubing, and complex girth seam conditions on large shells. Welds meet acceptance criteria for air tightness, hydrostatic testing and serial production of refrigeration equipment.
Model | Applicable Refrigeration & Heat Transfer Scenarios | Core Value |
MWH Series Heat Exchanger U-tube Welding Machine | Heat transfer coils for evaporators & condensers; compact stations with dense U-tube bundles | Compact dedicated torch for confined tube bundle space; programmed TIG autogenous welding. One operator can manage two units, cutting scrap rates caused by refrigerant leakage. Ideal for high-volume prefabrication of heat exchangers. |
MWP Series All-position Tube-to-Tubesheet Automatic Welder | Tube-to-tubesheet joints of shell-and-tube heat exchangers, condensers and evaporators; MWP‑38 fits compact small tubesheet stations | Supports autogenous / wire-feed processes; compatible with stainless steel, carbon steel and titanium alloy. 7×24 continuous operation. No repeated parameter tuning for tube size change, ensuring reliable tightness of tube-to-tubesheet joints. |
MWF Series Closed Tube-to-Tube Orbital Welder | Circular butt welds of thin-wall tubing for refrigeration unit piping & heat transfer equipment, Φ3.17 – Φ219mm | Programmed heat input control. Dual argon shielding: torch side + backside purge inside tube, minimizing root oxidation on stainless steel. MWA power supply stores up to 990 parameter sets for fast changeover among multiple specifications. |
MWHF Series Automatic Girth Welding Equipment | Large girth seams on heat exchanger shells, heads and nozzles | Programmable welding via fixtures & workpiece rotation mechanism, suitable for mass shell girth seam prefabrication in workshops. Process qualification is required for different working conditions; thin-wall tube-to-tube welding parameters cannot be directly reused. |
MWA‑200 / MWA‑400 Integrated Intelligent Welding Power Source | Power unit compatible with the full range of welding heads | Automatically generates expert welding parameters by inputting tube diameter & wall thickness. 990 recipes storable and recallable, drastically cutting repeated tuning for mixed-part production. |

Highlights of On-site Communication
During the exhibition, Booth C73 Hall 3 received numerous process engineers and procurement managers from manufacturers of heat exchangers, evaporators, condensers, heat pump chillers, cold chain equipment, refrigeration pipe prefabrication shops, HVAC contractors and refrigeration system integrators. Visitors mainly focused on four manufacturing challenges: torch accessibility for dense U-tube bundles, weld consistency of mass tube-to-tubesheet joints, control of burn-through and root oxidation on thin-wall tubing, and matching equipment & procedures for large shell girth seams.
Mwelding process engineers carried out one-on-one condition assessments based on customer drawings, tube specs, material grades, joint geometry and takt time, with live demo machines and real project references. We clarified selection boundaries of our four flagship models, differentiated applicable scenarios for autogenous welding vs. wire-fed welding, and explained best practices for coordinated shielding gas control: torch-side protection and backside argon purge for stainless steel piping. Meanwhile, we demonstrated practical advantages of automatic recipe generation, storage and recall on MWA intelligent power sources.
Many visitors brought workpiece drawings for immediate process evaluation. Multiple parties reached letters of intent, including coupon welding trials, factory tours in Shanghai and customized process packages. They aim to replace manual welding which suffers from frequent defects, high rework rates and heavy reliance on senior welders, and improve stable mass delivery of evaporators and condensers.

Industry Trend Insights
Feedback collected at RACC Hangzhou Refrigeration & Cold Chain Expo shows that buyers in China’s HVAC, heat pump, cold storage and cold chain equipment sectors have shifted their focus from standalone machine procurement toward integrated equipment-process solutions, suitability for confined tube bundle environments, mass production stability, weld tightness assurance and full-lifecycle technical service.
Refrigeration and heat transfer hardware widely adopts dense U-bundle arrays and huge volumes of tube-to-tubesheet joints. Manual welding is constrained by workspace, operator skill and unstable heat input, which easily leads to lack of fusion, porosity and root oxidation — directly creating refrigerant leakage hazards. Hardware-only supply without on-site process validation, fixture packages and operator training seldom scales into stable mass production. End-users increasingly prefer original manufacturers capable of in-house R&D, process tuning, coupon testing and custom fixture supply.
Mwelding will keep upgrading our dedicated welding process library for refrigeration, heat pump and cold chain equipment, and strengthen process validation for U-tube bundles, tube-to-tubesheet connections and thin-wall piping. We deliver a one-stop service package covering equipment selection, process tuning, procedure qualification, fixture supply and operator training for the HVAC refrigeration & cold chain sector, supporting high-quality large-scale fabrication of heat transfer piping.
Technical Cooperation Invitation
Though the exhibition has closed, technical communication continues. If you have welding projects involving heat exchanger U-bundles, tube-to-tubesheet joints, thin-wall refrigeration piping or girth seams on shells & heads, please contact us for:
1. Selection proposal and technical documentation of orbital pipe welders for refrigeration & cold chain applications
2. Coupon welding test and welding procedure tuning support
3. Demo trial and on-site factory visit reservation at our Shanghai facility
About Mwelding
Shanghai Mwelding Intelligent Technology Co., Ltd. is a National High-tech Enterprise and Shanghai Specialized, Refined, Unique & Innovative Enterprise. With over a decade’s focus on automated precision orbital pipe welding and multiple independent welding patents, we hold ISO 9001, ISO 14001, ISO 45001 and EU CE certification. We specialize in R&D and manufacturing of tube-to-tube, tube-to-tubesheet, girth seam and hot-wire cladding welding systems. Renowned for precision, stability, user-friendliness and competitive value, Mwelding serves thousands of equipment manufacturers at home and abroad. Custom machine development and overseas project delivery are available.
l National Technical Hotline: +86-21-62507510
l Technical Email: mw@mwelding.com.cn
l Website: https://www.mwelding.com.cn
l Address: Building 7, China-Germany Industrial Park, No.669 Zhongde Road, Songjiang District, Shanghai, China









