Show Overview
The 12th China International Tube Exhibition (Tube China 2026) successfully concluded at Shanghai New International Expo Centre during September 21–24. As a core event of the Tube Worldwide global exhibition series, Tube China is one of Asia’s most influential professional exhibitions covering the full pipe industrial chain. Spanning 35,000 ㎡, the show gathered over 400 exhibitors from home and abroad and attracted more than 55,000 professional visitors. Running concurrently with Wire China, the total exhibition area of the two shows exceeded 100,000 ㎡, forming a one-stop trading and communication platform covering pipe raw materials, processing equipment and end-user applications.
Centered on energy conservation, environmental protection, low-carbon development and digital intelligent transformation, this edition featured three thematic zones: heat treatment, sawing & laser cutting, non-ferrous metals and high-performance alloy materials. It showcased innovative applications of stainless steel, titanium alloy and non-ferrous metal pipes in petrochemicals, energy & water supply, new energy, aerospace, AI liquid cooling and other sectors.
With the upgrading of downstream industries, market demand for stainless steel, titanium alloy, 316L thin-wall and carbon steel pipes keeps rising. Conventional manual welding commonly suffers from inconsistent weld quality, unstable NDT pass rate, burn-through risks for thin-wall tubes, shortage of senior welders, non-replicable welding procedures and poor traceability, which restrict finished pipe quality and mass delivery efficiency. Shanghai Mwelding Intelligent Technology Co., Ltd. participated in the show at Booth W3-B03, presenting a full lineup of precision orbital welding machines and complete process solutions for pipe fabricators and pipeline engineering contractors. On-site activities included machine demonstrations, process case sharing, equipment trials and one-on-one technical consultations. Around orbital automatic pipe welding, thin-wall small-diameter tube & flange/tee circumferential joint fabrication, production line intelligent retrofitting, welding data traceability and reduced reliance on skilled welders, we explored practical pathways for intelligent pipe welding together with industry peers.

Photo: Mwelding Booth W3-B03 at Tube China 2026
Core Exhibits at Booth W3-B03
We displayed our complete automatic welding machine portfolio tailored for pipe manufacturing. The equipment covers pipe sizes from Φ3.17 mm precision small tubes up to Φ1422 mm large industrial pipes, with custom solutions available for extra-large diameters. Suitable for both factory prefabrication and on-site field welding, the welds can reliably pass air tightness, hydrostatic, helium leak and non-destructive testing, covering petrochemical, energy & water supply, refrigeration heat exchangers, semiconductors, AI liquid cooling CDU and manifold piping and other application scenarios.
Model | Application Conditions | Core Benefits |
MWH U-Tube Welding Machine For Heat Exchanger | High-density U-tube bundles for heat exchangers; butt / socket welding of U-tubes in confined spaces | Compact torch designed for narrow gaps in tube bundles; autogenous TIG welding without filler wire, excellent weld gas tightness; one operator can manage two units, cutting labor cost for mass production |
MWF Closed Chamber Tube-to-Tube Orbital Welding Machine | Precision prefabrication of thin-wall stainless steel, carbon steel and titanium alloy pipes, Φ3.17–219 mm | Dual protection with argon shielding and circulating water cooling, mirror-like inner weld surface without oxidation; precisely controlled heat input to avoid burn-through and deformation of thin-wall tubes; meets NDT and helium test requirements, ideal for high-purity fluid and liquid cooling precision tubing |
MWG Open Orbital Tube Welding Machine | Medium & heavy-wall carbon steel, stainless steel and titanium alloy pipes; workshop prefabrication + high-altitude on-site field welding | 360° all-position orbital welding, supports autogenous / filler wire modes; quick-clamp fixture for easy setup; welds reach Class 1 NDT standard |
MWHF Circumferential Seam Automatic Welding Equipment | Mass prefabrication of circumferential joints including pipe flanges and tees | Modular tooling for fast changeover, welding efficiency 3–5 times higher than manual welding; compact footprint suitable for mass tube production, meets high-pressure sealing and NDT requirements |
MWP All-position Tube Sheet Orbital Welding Machine | Tube-to-tubesheet joints for heat exchanger bundles, various tube ends ID6–ID63 mm | Lightweight mini torch for tight gaps in dense tube bundles; autogenous / filler wire optional, 7×24 continuous operation; no repeated parameter tuning for diameter changes, solves incomplete penetration and missed welds in heat exchanger tube holes |

Photo: MWF Closed Chamber Tube-to-Tube Orbital Welding Machine demo at Tube China
Highlights of On-site Communication
During the exhibition, Booth W3-B03 welcomed numerous process, production and purchasing managers from pipe fabricators, pipeline system suppliers, petrochemical & energy equipment manufacturers, new energy fluid piping makers and liquid cooling system integrators. Visitors focused on five key topics: automatic orbital welding procedures for stainless steel / titanium alloy / carbon steel pipes; efficient welding for thin-wall small tubes, flange and tee circumferential seams; cost-saving automation retrofitting of pipe prefabrication lines; welding data archiving and traceability for project acceptance; practical implementation to replace senior welders with automated equipment.
Our process engineers evaluated working conditions one-on-one according to customer-provided pipe specs, materials and production modes (shop prefabrication / field welding), supported by pipe samples and real project references. We clarified the selection boundaries between closed, open, circumferential seam and tubesheet / U-tube welding machines, explained heat input control for different materials, and answered questions about custom tooling and process tuning for non-standard diameters and special joints.
Many pipe manufacturers brought drawings and samples for on-site assessment. Multiple parties reached preliminary cooperation intentions, including sample welding trials, factory visits in Shanghai and customized automation upgrade proposals for pipe production lines, aiming to resolve production pain points such as inconsistent manual welding quality, welder shortage and unstable mass delivery.
Industry Trend Insights
Feedback from Tube China 2026 shows that green and intelligent transformation has become the main theme of pipe industry upgrading. As a critical process for pipe deep processing, pipe welding procurement focus has shifted from standalone equipment purchase toward integrated equipment-process capability, adaptability for thin-wall / special alloy pipes, production line deployment, full-process welding traceability and reduced reliance on skilled welders.
Stainless steel, titanium alloy and thin-wall alloy pipes have strict requirements on heat input, weld formation and internal shielding. Traditional manual welding heavily depends on operator skills, often causing burn-through, oxidation and failed NDT. The sector also faces challenges including a shortage of qualified welders, non-replicable procedures and incomplete quality records. Source automatic welding manufacturers with independent R&D capability for full-diameter machines, plus supporting process tuning, custom tooling and hands-on training services, are gaining growing recognition from pipe fabricators.
Mwelding will keep upgrading dedicated welding process libraries for various pipes, validate procedures for stainless steel, titanium alloy and carbon steel, and deliver integrated solutions covering equipment selection, trial welding, custom tooling and operator training for pipe manufacturers and pipeline contractors. Intelligent welding empowers high-quality development of the pipe industry.
Technical Cooperation Invitation
The exhibition has closed, while technical communication continues. If you have projects involving precision thin-wall tubes, U-tube bundles, tube-to-tubesheet joints, flange & tee circumferential seams, large-bore pipe prefabrication or on-site construction, please contact us for:
1. Selection proposal and technical documentation of orbital welding machines for your pipe application
2. Sample welding test and pipe welding process tuning support
3. Reservation for machine demo, Shanghai factory tour and production line automation upgrade solution
About Mwelding
Shanghai Mwelding Intelligent Technology Co., Ltd. is a National High-tech Enterprise and Shanghai Specialized, Refined, Differential & Innovative Enterprise. With more than ten years of focus on automatic precision pipe welding, we hold multiple independent welding patents. We have obtained ISO9001, ISO14001, ISO45001 certifications and CE certification for our products. Our orbital welding machine range covers Φ3.17 mm to Φ1422 mm, suitable for both batch shop prefabrication and field on-site welding. We serve petrochemicals, energy & water supply, refrigeration heat exchangers, AI liquid cooling, semiconductors, aerospace and new energy equipment industries. Custom solutions for non-standard pipe sizes and special joints are available for overseas projects.
l National Hotline: 021-62507510
l Technical Email: mw@mwelding.com.cn
l Website: https://www.mwelding.com.cn
l Address: Building 7, Zhongde Industrial Park, No.669 Zhongde Road, Songjiang District, Shanghai










